VLAN Setup

Location:

• B404 Switch: 3Com 4400

Workstations for VLAN 2:

• B404-1-7 (Port: 3)
• B404-2-7 (Port: 16)
• Port 50 to 3Com 4924 in B402

Workstations for VLAN 3:

• B404-1-6 (Port: 6)
• B404-2-6 (Port: 10)

===========================================

Location:

• B402 Switch: 3Com 4924
• Port 11 to 3Com 4400 in B404
• Port 2 to DHCP Server

Procedure:

1. B404: Setup VLAN 2 on 3Com 4400

• Port 3 and Port 16 untagged
• Port 50 tagged

1. B402 Setup VLAN 2 on 3Com 4924

• Port 2 and 11 tagged

1. Setup on NW server (DHCP Server):

• enter the following commands:
• LOAD BASP.LAN FRAME=ETHERNET_II NAME=BASP_1_V2_EII VSLOT=1 VLAN=2 # create a virtual interface
• BASP BIND BASP_1_V2_EII B57-OLD_EII # bind the virtual interface to a physical interface
• BIND IP BASP_1_V2_EII ADDR=192.168.2.11 MASK=255.255.255.0 # bind an IP to the virtual interface

1. Run DNSDHCP Management Console on any PC Workstation; add a DHCP subnet for distributing IPs on the 192.168.2.0 subnet. Set the address range if required.
2. Verify by renewing the DHCP leases on the two workstations in B404

• Note: When loading BASP.LAN, the parameters used for the virtual NIC MUST match those used for loading the REAL NIC.